Loading...
HomeMy WebLinkAboutRes 21-17 Approving and Agreement with Johnson Controls for WA Fire System UpdatesTOWN OF WESTLAKE RESOLUTION NO, 21-17 A RESOLUTION OF THE TOWN COUNCIL OF THE TOWN OF WESTLAKE, TEXAS, APPROVING AGREEMENT WITH JOHNSON CONTROLS TO UPDATE THE WESTLAKE ACADMEY FIRE CONTROL SYSYEMS AND AUTHORIZE THE TOWN MANAGER TO MAKE FUNDING CHANGES NOT TO EXCEED $25,000 ON THIS PROJECT. WHEREAS, the Town of Westlake owns and operates the Westlake Academy and provides facilities for Town and Academy use; and, WHEREAS, the fire alarm system was installed in 2003 and will be converted to the network style system; and, WHEREAS; the system will run on the campus communication fiber and not the copper wire which was installed in 2003 and, WHEREAS, the Secondary and Arts and Sciences Building will receive an upgrade to their CPU; the display system will be converted to the network style system; and, WHEREAS, the Town Council finds that the passage of this resolution is in the best interest of the citizens of Westlake. NOW, THEREFORE., BE IT RESOLVED BY THE TOWN COUNCIL, OF THE TOWN OF WESTLAKE, TEXAS: SECTION l: That, all matters stated in the Recitals hereinabove are found to be true and correct and are incorporated herein by reference as if copied in their entirety. SECTION 2: That the Town of Westlake Town Council hereby approves the agreement with Johnson Controls as attached as Exhibit "A" and authorize Town Manager to make funding changes not to exceed $25,000 on this project., attached as Exhibit "A". SECTION 3: Ifany portion of this Resolution shall, for any reason, be declared invalid by any court of competent jurisdiction, such invalidity shall not affect the remaining provisions hereof and the Council hereby determines that it would have adopter this Resolution without the invalid provision. SECTION 4: That this resolution shall become effective from and after its date of passage. PASSED AND APPROVED ON THIS DAY 24"" OF MAY 2021. Rcsohrtion 2 i-i 7 Page, i z.- 1 ATTEST: Tod Wood, Town Secretary APPROVED AS TO FORM: For L. Stanton Lowry, Town Attorney Laura L. Wheat, Mayor A" Z4�� Amanda DeGan, Town Manager Resohdi;.,n 2I- ? Pa�c 2 eF2 Johnson Controls TO: Westlake Muncipal Complex 2600 Jt Ottinger Rd WESTLAKE, TX 76262-8012 800 Railhead Rd Exhibit A Ste 304 FORT WORTH, TX 76106-1981 (817) 210 0700 FAX: (817) 624 4463 Johnson Controls Quotation Project: Westlake Academy Customer Reference. - Johnson Controls Reference: 405413480 Date: 05/03/2021 Page 1 of 7 Johnson Controls is pleased to offer for your consideration this quotation for the above project. QUANTITY MODEL NUMBER DESCRIPTION Main Building Network 4100-6078 4100-6303 4100-6304 TECH LAB NETWORK IFC CARD, MODULAR 4120 MM-L DUPLEX FIBER MEDIA 4120 MM-R DUPLEX FIBER MEDIA TECHNICAL LABOR Net selling price for Main Building Network, FOB shipping point, $4,230.00 Secondary Building Network 742-590 41000/ES 2X40 IFC DOOR ASSY 4100-7158 4100ES MSTR CTLR UPGD NO DSPLY 743-2265 RUI+ CPU/MTHR BD FOR SPS 4100-6078 NETWORK IFC CARD, MODULAR 4100-6303 4120 MM-L DUPLEX FIBER MEDIA 4100-6304 4120 MM-R DUPLEX FIBER MEDIA TECH LAB TECHNICAL LABOR Net selling price for Secondary Building Network, FOB shipping point, $6,702.00 Arts Building Network 742-590 4100-7158 743-2265 4100-6078 4100-6303 4100-6304 TECH LAB 41000/ES 2X40 IFC DOOR ASSY 4100ES MSTR CTLR UPGD NO DSPLY RUI+ CPU/MTHR BD FOR SIPS NETWORK IFC CARD, MODULAR 4120 MM-L DUPLEX FIBER MEDIA 4120 MM-R DUPLEX FIBER MEDIA TECHNICAL LABOR Net selling price for Arts Building Network, FOB shipping point, $6,702.00 THIS QUOTATION AND ANY RESULTING CONTRACT SHALL BE SUBJECT TO THE GENERAL TERMS AND CONDITIONS ATTACHED HERETO. Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America © 2020 Johnson Controls. ALL RIGHTS RESERVED. Johnson Controls QUANTITY Project: Westlake Academy Customer Reference: Johnson Controls Reference Date: 05/03/2021 Page 2 of 7 Johnson Controls Quotation MODEL NUMBER DESCRIPTION 405413480 Panel Grounding 11 E120V-GT 120V HYBRID SRG PROTECT TECH LAB TECHNICAL LABOR Net selling price for Panel Grounding, FOB shipping point, $4,634.00 Gym Panel 1 4007-9202 4007ES FRCP, IDNAC, PLATINUM 1 4007-9810 4007ES MODULAR NIC 1 4007-6303 4120 MM-L DUPLEX FIBER MEDIA 1 4007-6304 4120 MM-R DUPLEX FIBER MEDIA 1 4606-9205 4007ES COLOR LCD ANNUN, PLAT 1 2975-9464 4606-9205 SF BRACKET, PLATINUM 2 2081-9275 BATTERY 18AH 1 DPFA INSTALLATION MATERIAL TECH LAB TECHNICAL LABOR Net selling price for Gym Panel, FOB shipping point, $13,116.00 MPH Panel 1 4007-9202 4007ES FACP, IDNAC, PLATINUM 1 4007-9810 4007ES MODULAR NIC 1 4007-6303 4120 MM-L DUPLEX FIBER MEDIA 1 4007-6304 4120 MM-R DUPLEX FIBER MEDIA 1 4606-9205 4007ES COLOR LCD ANNUN, PLAT 1 2975-9464 4606-9205 SF BRACKET, PLATINUM 2 2081-9275 BATTERY 18AH 1 DPFA INSTALLATION MATERIAL TECH LAB TECHNICAL LABOR Net selling price for MPH Panel, FOB shipping point, $13,116.00 Total net selling price, FOB shipping point, $48,500.00 Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America © 2020 Johnson Controls. ALL RIGHTS RESERVED. Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Johnson "/ 4{� Date:05/03/2021 Controls Page 3 of 7 Johnson Controls Quotation Comments SCOPE: Westlake Academy Fiber Network The above pricing includes labor and material to convert the Westlake Academy fire alarm system into a network style system. This pricing includes fiber media cards that will be installed in the fire alarm panels in the Main, Secondary, and Arts Building panels. The Secondary and Arts Buildings will receive a CPU and display upgrade. This upgrade allows the fire alarm systems to operate independently while reporting back to a central location. This network is intended to be connected on Fiber Optics eliminating the copper connection between the buildings. This quotation also includes pricing options for grounding existing panels and adding control panels to the GYM and MPH buildings. The grounding option includes providing and installing surge suppressors for 8 NAC panels and 3 main fire control panels that are existing around the campus. The Gym and MPH panel options include adding fire control panels to each of these buildings and taking over control of the existing fire alarm devices in each building with its own panel. The panels will operate as its own building panel but will be connected on the fiber loop and report back to the Main FACP in the Main Campus Building. Westlake Academy will need to be responsible for providing Fiber to the existing panels in the Main, Secondary, and Arts Buildings as well as to the new panels in the GYM and MPH Buildings. This fiber shall be connected in a loop and be installed to the fire panels with fiber connectors installed. Westlake will also need to provide 120V power at the new panels for the Gym and MPH Buildings. This quotation is based on all work being performed during normal business hours. This price does not include tax. This price does include a one year warranty on the parts and labor listed above. Pricing Is Valid For 30 Days Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America © 2020 Johnson Controls. ALL RIGHTS RESERVED. Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Johnson Date:05/03/2021 Controls Page 4 of 7 Johnson Controls Quotation Comments Johnsen Controls Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America 0 2020 Johnson Controls, ALL RIGHTS RESERVED. Johnson Controls 1. Payment. Amounts are due upon receipt of the invoice and shall be paid by Customer within 30 days. Invoicing disputes must be identified in writing within 21 days of the invoice date. Payments of any disputed amounts are due and payable upon resolution. All other amounts remain due within 30 days, Work performed on a time and material basis shall be at Company's then -prevailing rate for material, labor, and related items, in effect at the time supplied under this Agreement. Company shall invoice Customer for progress payments to 100% percent based upon equipment delivered or stored, and services performed. In the event project duration exceeds one month, Company reserves the right to submit partial invoices for progress payments for work completed at the project site, Customer agrees to pay any progress invoices in accordance with the payment terms set forth herein. In exchange for close- out documents to be provided by Company, Customer agrees to pay Company the remaining project balance when on -site labor is completed and prior to any final inspections. Customers without established satisfactory credit and Customers who fail to pay amounts when due may be required to make payments of cash in advance, upon delivery or as otherwise specified by Company. Company reserves the right to revoke or modify Customer's credit in its sole discretion. Customer's failure to make payment when due is a material breach of this Agreement and will give Company, without prejudice to any other right or remedy, the right to (a) stop performing any Services and/or withhold further deliveries of Equipment and other materials; terminate or suspend any unpaid software licenses; and/or terminate this Agreement; and (b) charge Customer interest on the amounts unpaid at a rate equal to the lesser of 1.5% per month or the maximum rate permitted under applicable law, until payment is made in full. Customer agrees to pay all of Company's reasonable collection costs, including legal fees and expenses. 2. Deposit. Customer agrees to pay a deposit equal to 30% of the project sell price (pre-tax) prior to Company providing any labor or materials on the project. Company will generate an invoice for the 30% deposit within three business days after Company's receipt of a written agreement or order from Customer. Company will not commence work until receipt of the deposit 3. Pricing. The pricing set forth in this Agreement is based on the number of devices to be installed and services to be performed as set forth in the Scope of Work ("Equipment" and "Services"), If the actual number of devices installed or services to be performed is greater than that set forth in the Scope of Work, the price will be increased accordingly, If this Agreement extends beyond one year, Company may increase prices upon notice to the Customer. Customer agrees to pay all taxes, permits, and othercharges, including but not limited to state and local sales and excise taxes, however designated, levied or based on the service charges pursuant to this Agreement. Prices in any quotation or proposal from Company are subject to change upon notice sent to Customer at any time before the quotation or proposal has been accepted. Prices for products covered may be adjusted by Company, upon notice to Customer at any time prior to shipment, to reflect any increase in Company's cost of raw materials (e.g., steel, aluminum) incurred by Company after issuance of Company's applicable proposal or quotation. Pricing for Equipment and material covered by this Agreement does not include any amounts for changes in taxes, tariffs, duties or other similar charges imposed and/or enacted by a government. At any time prior to shipment, Company shall be entitled to an increase in time and money for any costs that it incurs directly or indirectly that arise out of or relate to changes in taxes, tariffs, duties or similar charges due to such changes. 4. Alarm Monitoring Services. Any reference to alarm monitoring services in this Agreement is included for pricing purposes only. Alarm monitoring services are performed pursuant to the terms and conditions of Company's standard alarm monitoring services agreement, 5. Code Compliance. Company does not undertake an obligation to inspect for compliance with laws or regulations unless specifically stated in the Scope of Work. Customer Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Date: 05/03/2021 Page 5 of 7 TERMS AND CONDITIONS (Rev. 4120) acknowledges that the Authority Having Jurisdiction (e.g. Fire Marshal) may establish additional requirements for compliance with local codes, Any additional services or equipment required will be provided at an additional cost to Customer. 6. Limitation of Liability; Limitations of Remedy. It is understood and agreed by the Customer that Company is not an insurer and that insurance coverage shall be obtained by the Customer and that amounts payable to company hereunder are based upon the value of the services and the scope of liability set forth in this Agreement and are unrelated to the value of the Customer's property and the property of others located on the premises. Customer agrees to look exclusively to the Customer's insurer to recover for injuries or damage in the event of any loss or injury and that Customer releases and waives all right of recovery against Company arising by way of subrogation. Company makes no guaranty or Warranty, including any implied warranty of merchantability or fitness for a particular purpose that equipment or services supplied by Company will detect or avert occurrences or the consequences therefrom that the equipment or service was designed to detect or avert. It is impractical and extremely difficult to fix the actual damages, if any, which may proximately result from failure on the part of Company to perform any of its obligations under this Agreement. Accordingly, Customer agrees that, Company shall be exempt from liability for any loss, damage or injury arising directly or indirectly from occurrences, or the consequences therefrom, which the equipment or service was designed to detect or avert. Should Company be found liable for any loss, damage or injury arising from a failure of the equipment or service in any respect, Company's liability shall be limited to an amount equal to the Agreement price (as increased by the price for any additional work) or where the time and material payment term Is selected, Customer's time and material payments to Company. Where this Agreement covers multiple sites, liability shall be limited to the amount of the payments allocable to the site where the incident occurred. Such sum shall be complete and exclusive. In no event shall Company be liable for any damage, loss, Injury, or any other claim arising from any servicing, alterations, modifications, changes, or movements of the Covered System(s) or any of its component parts by Customer or any third party. To the maximum extent permitted by law, in no event shall Company and its affiliates and their respective personnel, suppliers and vendors be liable to Customer or any third party under any cause of action or theory of liability, even if advised of the possibility of such damages, for any (a) special, incidental, consequential, punitive or indirect damages of any kind; (b) loss of profits, revenues, data, customer opportunities, business, anticipated savings or goodwill; (c) business interruption; or (d) data loss or other losses arising from viruses, ransomware, cyber-attacks or failures or Interruptions to network systems. The limitations of liability set forth in this Agreement shall inure to the benefit of all parents, subsidiaries and affiliates of Company, whether direct or indirect, Company's employees, agents, officers and directors. 7. Reciprocal Waiver of Claims (SAFETY Act). Certain of Company's systems and services have received Certification and/or Designation as Qualified Anti -Terrorism Technologies ("QATT") under the Support Anti -terrorism by Fostering Effective Technologies Act of 2002, 6 U.S.C. §§ 441-444 (the "SAFETY Act"). As required under 6 C.F.R. 25.5 (e), to the maximum extent permitted by law, Company and Customer hereby agree to waive their right to make anyclaims against the other for any losses, including business interruption losses, sustained by either party or their respective employees, resulting from an activity resulting from an "Act of Terrorism" as defined in 6 C.F.R. 25.2, when GATT have been deployed in defense against, response to, or recovery from such Act of Terrorism. 8. General Provisions. Customer has selected the service level desired after considering and balancing various levels of protection afforded, and their related costs. All work to be performed by Company will be performed during normal working hours of normal working days (6:00 a.m. — 5:00 p.m., Monday through Friday, excluding Company holidays), as defined by Company, unless additional times are specifically described in lhisAgreement. Companywill perform the services described in the Scope of Work section ("Services") for one or more system(s) or equipment as described in the Scope of Work section or the listed attachments ("Covered System(s)"). The Customer shall promptly notify Company of any malfunction in the Covered System(s) which comes to Customers attention, This Agreement assumes the Covered System(s) are in operational and maintainable condition as of the Agreement date. If, upon initial Inspection, Company determines that repairs are recommended, repair charges will be submitted for approval prior to any work. Should such repair work be declined Company shall be relieved from any and all liability arising therefrom. UNLESS OTHERWISE SPECIFIED IN THIS AGREEMENT, ANY INSPECTION (AND, IF SPECIFIED, TESTING) PROVIDED UNDER THIS AGREEMENT DOES NOT INCLUDE ANY MAINTENANCE, REPAIRS, ALTERATIONS, REPLACEMENT OF PARTS, OR ANY FIELD ADJUSTMENTS WHATSOEVER, NOR DOES IT INCLUDE THE CORRECTION OF ANY DEFICIENCIES IDENTIFIED BY COMPANY TO CUSTOMER. COMPANY SHALL NOT BE RESPONSIBLE FOR EQUIPMENT FAILURE OCCURRING WHILE COMPANY IS IN THE PROCESS OF FOLLOWING ITS INSPECTION TECHNIQUES, WHERE THE FAILURE ALSO RESULTS FROM THE AGE OR OBSOLESCENCE OF THE ITEM OR DUE TO NORMAL WEAR AND TEAR, THIS AGREEMENT DOES NOT COVER SYSTEMS, EQUIPMENT, COMPONENTS OR PARTS THAT ARE BELOW GRADE, BEHIND WALLS OR OTHER OBSTRUCTIONS OR EXTERIOR TO THE BUILDING, ELECTRICAL WIRING, AND PIPING. 9. Customer Responsibilities. Customer shall furnish all necessary facilities for performance of its work by Company, adequate space for storage and handling of materials, light, water, heat, heat tracing, electrical service, local telephone, watchman, and crane and elevator service and necessary permits. Where wet pipe system is installed, Customer shall supply and maintain sufficient heat to prevent freezing of the system. Customer shall promptly notify Company of any malfunction in the Covered System(s) which comes to Customers attention. This Agreement assumes any existing system(s) are in operational and maintainable condition as of the Agreement date. If, upon Initial inspection, Company determines that repairs are recommended, repair charges will be submitted for approval prior to any work. Should such repair work be declined Company shall be relieved from any and all liability arising therefrom. Customer shall further; • supply required schematics and drawings unless they are to be supplied by Company in accordance with this Agreement; • Provide a safe work environment, in the event of an emergency or Covered System(s) failure, take reasonable safety precautions to protect against personal injury, death, and property damage, continue such measures until the Covered System(s) are operational, and notify Company as soon as possible under the circumstances. • Provide Company access to any system(s) to be serviced, • Comply with all laws, codes, and regulations pertaining to the equipment and/or services provided under this Agreement. Customer is solely responsible for the establishment, operation, maintenance, access, security and other aspects of its computer network ("Network") and shall supply Company secure Network access for providing its services. Products networked, connected to the Internet, or otherwise connected to computers or other devices must be appropriately protected by Customer and/or end user against unauthorized access, Customer is responsible to take appropriate measures, including performing back-ups, to protect information, including without limit data, software, or files (collectively "Data") prior to receiving the service or products. Fire, Security, Communicatiqns, Sales & Service Offices & Representatives in Principal Cities throughout North America 0 2020 Johnson Controls. ALL RIGHTS RESERVED. rr Johnson ��{1 Controls 10, Excavation, In the event the Work includes excavation, Customer shall pay, as an extra to the contract price, the cost of any additional work performed by Company dues to water, quicksand, rock or other unforeseen condition or obstruction encountered or shoring required. 11, Structure and Site Conditions. While employees of Company will exercise reasonable care in this respect, Company shall be under not responsibility for loss or damage due to the character, condition or use of foundations, walls, or other structures not erected by Company or resulting from the excavation in proximity thereto, or for damage resulting from concealed piping, wiring, fixtures, or other equipment or condition of water pressure. All shoring or protection of foundation, walls or other structures subject to being disturbed by any excavation required hereundershall be the responsibility of Customer, Customer shall have all things in readiness for installation including, without limitation, structure to support the sprinkler system and related equipment (including tanks), other materials, floor or suitable working base, connections and facilities for erection at the time the materials are delivered. In the event Customer fails to have all things in readiness at the time scheduled for receipt of materials, Customer shall reimburse Company for all expenses caused by such failure. Failure to make areas available to Company during performance in accordance with schedules that are the basis for Company's proposal shall be considered a failure to have things in readiness in accordance with the terms of this Agreement. 12. Confined Space. If access to confined space by Company is required for the performance of Services, Services shall be scheduled and performed in accordance with Company's then - current hourly rate. 13. Hazardous Materials. Customer represents that, except to the extent that Company has been given written notice of the following hazards prior to the execution of this Agreement, to the best of Customer's knowledge there is no: • "permit confined space," as defined by OSHA, • risk of infectious disease, • need for air monitoring, respiratory protection, or other medical risk, • asbestos, asbestos -containing material, formaldehyde or other potentially toxic or otherwise hazardous material contained in or on the surface of the floors, walls, ceilings, insulation or other structural components of the area of any building where work is required to be performed under this Agreement. All of the above are hereinafter referred to as 'Hazardous Conditions". Company shall have the right to rely on the representations listed above. If hazardous conditions are encountered by Company during the course of Company's work, the discovery of such materials shall constitute an event beyond Company's control and Company shall have no obligation to further perform in the area where the hazardous conditions exist until the area has been made safe by Customer as certified in writing by an independent testing agency, and Customer shall pay disruption expenses and re -mobilization expenses as determined by Company. This Agreement does not provide for the cost of capture, containment or disposal of any hazardous waste materials, or hazardous materials, encountered in any of the Covered System(s) and/or during performance of the Services. Said materials shall at all times remain the responsibility and property of Customer. Company shall not be responsible for the testing, removal or disposal of such hazardous materials. 14. OSHA Compliance. Customer shall indemnify and hold Company harmless from and against any and all claims, demands and/or damages arising in whole or in pal from the enforcement of the Occupational Safety Health Act (and any amendments or changes thereto) unless said claims, demands or damages are a direct result of causes within the exclusive control of Company. 15. Interferences. Customer shall be responsible to coordinate the work of other trades (including but not limited to ducting, piping, and electrical) and for and additional costs incurred by Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Date: 05/03/2021 Page 6 of 7 Company arising out of interferences to Company's work caused by other trades. 16. Modifications and Substitutions. Company reserves the right to modify materials, including substituting materials of later design, providing that such modifications or substitutions will not materially affect the performance of the Covered System(s). 17. Changes, Alterations, Additions. Changes, alterations and additions to the Scope of Work, plans, specifications or construction schedule shall be invalid unless approved in writing by Company. Should changes be approved by Company, that increase or decrease the cost of the work to Company, the parties shall agree, in writing, to the change in price prior to performance of any work. However, if no agreement is reached prior to the time for performance of said work, and Company elects to perform said work so as to avoid delays, then Company's estimate as to the value of said work shall be deemed accepted by Customer. In addition, Customer shall pay for all extra work requested by Customer or made necessary because of incompleteness or inaccuracy ofplans or other information submitted by Customer with respect to the location, type of occupancy, or other details of the work to be performed, In the event the layout of Customer's facilities has been altered, or is altered by Customer prior to the completion of the Work, Customer shall advise Company, and prices, delivery and completion dates shall be changed by Company as may be required. 18. Commodities Availability. Company shall not be responsible for failure to provide services, deliver products, or otherwise perform work required by this Agreement due to lack of available steel products or products made from plastics or other commodities. In the event Company is unable, after reasonable commercial efforts, to acquire and provide steel products, or products made from plastics or other commodities, if required to perform work required by this Agreement, Customer hereby agrees that Company may terminate the Agreement, or the relevant portion of the Agreement, at no additional cost and without penalty. Customer agrees to pay Company in full for all work performed up to the time of any such termination. 19. Project Claims. Any claim of failure to perform against Company arising hereunder shall be deemed waived unless received by Company, in writing specifically setting forth the basis for such claim, within ten (10) days after such claims arises. 20. Backcharges. No charges shall be levied against Company unless seventy-two (72) hours prior written notice is given to Company to correct any alleged deficiencies which are alleged to necessitate such charges and unless such alleged deficiencies are solely and directly caused by Company. 21. System Equipment. The purchase of equipment or peripheral devices (including but not limited to smoke detectors, passive infrared detectors, card readers, sprinkler system components, extinguishers and hoses) from Company shall be subject to the terms and conditions of this Agreement. If, in Company's sole judgment, any peripheral device or other system equipment, which is attached to the Covered System(s), whether provided by Company or a third party, interferes with the proper operation of the Covered System(s), Customer shall remove or replace such device or equipment promptly upon notice from Company. Failure of Customerto remove or replace the device shall constitute a material breach of this Agreement. If Customer adds any third party device or equipment to the Covered System(s), Company shall not be responsible for any damage to or failure of the Covered System(s) caused in whole or in part by such device or equipment. 22. Reports. Where inspection and/or test services are selected, such inspection and/or test shall be completed on Company's then current Report form, which shall be given to Customer, and, where applicable, Company may submit a copy thereof to the local authority having jurisdiction. The Report and recommendations by Company are only advisory in nature and are intended to assist Customer in reducing the risk of loss to property by indicating obvious defects or impairments noted to the system and equipment inspected and/or tested. They are Fire, Security, Communications, Sales & Service not intended to imply that no other defects or hazards exist or that all aspects of the Covered System(s), equipment, and components are under control at the time of inspection. Final responsibility for the condition and operation of the Covered System(s) and equipment and components lies with Customer, 23. Limited Warranty. Subject to the limitations below, Company warrants any equipment (as distinguished from the Software) installed pursuant to this Agreement to be free from defects in material and workmanship under normal use for a period of one (1) year from the date of first beneficial us or all or any part of the Covered System(s) or 18 months after Equipment shipments, whichever is earlier, provided however, that Company's sole liability, and Customer's sole remedy, under this limited warranty shall be limited to the repair or replacement of the Equipment or any part thereof, which Company determines is defective, at Company's sole option and subject to the availability of service personnel and parts, as determined by Company. Company warrants expendable items, including, but not limited to, video and print heads, television camera tubes, video monitor displays tubes, batteries and certain other products in accordance with the applicable manufacturers warranty. Company does not warrant devices designed to fail in protecting the System, such as, but not limited to, fuses and circuit breakers. Company warrants that any Company software described in this Agreement, as well as software contained in or sold as pal of any Equipment described in this Agreement, will reasonably conform to its published specifications in effect at the time of delivery and for ninety (90) days after delivery. However, Customer agrees and acknowledges that the software may have inherent defects because of its complexity. Company's sole obligation with respect to software, and Customers sole remedy, shall be to make available published modifications, designed to correct inherent defects, which become available during the warranty period. If Repair Services are included in this Agreement, Company warrants that its workmanship and material for repairs made pursuant to this Agreement will be free from defects for a period of ninety (90) days from the date of furnishing. EXCEPT AS EXPRESSLY SET FORTH HEREIN, COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SERVICES PERFORMED OR THE PRODUCTS, SYSTEMS OR EQUIPMENT, IF ANY, SUPPORTED HEREUNDER. Warranty service will be performed during Company's normal working hours. If Customer requests warranty service at other than normal working hours, service will be performed at Company's then current rates for after ours services. All repairs or adjustments that are or may become necessary shall be performed by and authorized representative of Company. Any repairs, adjustments or interconnections performed by Customer or any third party shall void all warranties. Company makes no and specifically disclaims all representations or warranties that the services, products, software or third party product or software will be secure from cyber threats, hacking or other similar malicious activity. 24. Indemnity. Customer agrees to indemnify, hold harmless and defend Company against any and all losses, damages, costs, including expert fees and costs, and expenses including reasonable defense costs, arising from any and all third party claims for personal injury, death, properly damage or economic loss, including specifically any damages resulting from the exposure of workers to Hazardous Conditions whether or not Customer pre -notifies Company of the existence of said hazardous conditions, arising in any way from any act or omission of Customer or Company relating in any way to this Agreement, including but not limited to the Services under this Agreement, whether such claims are based upon contract, warranty, tort (including but not limited to active or passive negligence), strict liability or otherwise. Company reserves the right to select counsel to represent it in any such action. 25. Insurance. Customer shall name Company, its officers, Offices & Representatives in Principal Cities throughout North America 0 2020 Johnson Controls. ALL RIGHTS RESERVED. Johnson 0)00 Controls employees, agents, subcontractors, suppliers, and representatives as additional insureds on Customer's general liability and auto liability policies. 26. Termination. Any termination under the terms of this Agreement shall be made in writing. In the event Customer terminates this Agreement prior to completion for any reason not arising solely from Company's performance or failure to perform, Customer understands and agrees that Company will incur costs of administration and preparation that are difficult to estimate or determine. Accordingly, should Customer terminate this Agreement as described above, Cuslomeragrees to pay all charges incurred for products and equipment installed and services performed, and in addition pay an amount equal to twenty (20%) percent of the price of products and equipment not yet delivered and Services not yet performed, return all products and equipment delivered and pay a restocking fee of twenty (20%) percent the price of products or equipment returned. Company may terminate this Agreement immediately at its sole discretion upon the occurrence of any Event of Default as hereinafter defined. Company may also terminate this Agreement at its sole discretion upon notice to Customer if Company's performance of its obligations under this Agreement becomes impracticable due to obsolescence of equipment at Customer's premises or unavailability of parts. 27. Default. An Event of Default shall be (a) failure of Customer to pay any amount when due and payable, (b) abuse of the System or the Equipment, (c) dissolution, termination, discontinuance, insolvency or business failure of Customer. Upon the occurrence of an Event of Default, Company may pursue one or more of the following remedies: (i) discontinue furnishing Services and delivering Equipment, (ii)) by written notice to Customer declare the balance of unpaid amounts due and to become due under this Agreement to be immediately due and payable; (Ili) receive immediate possession of any Equipment forwhich Customer has not paid; (iv) proceed at law or equity to enforce performance by Customer or recover damages for breach of this Agreement, and (v) recover all costs and expenses, including without limitation reasonable attorneys' fees, in connection with enforcing or attempting to enforce this Agreement. 28. Exclusions. Unless expressly included in the Scope of Work, this Agreement expressly excludes, without limitation, testing inspection and repair of duct detectors, beam detectors, and UV/IR equipment; provision of fire watches; clearing of ice blockage; draining of improperly pitched piping; replacement of batteries; recharging of chemical suppression systems; reloading of, upgrading, and maintaining computer software; system upgrades and the replacement of obsolete systems, equipment, components or parts; making repairs or replacements necessitated by reason of negligence or misuse of components or equipment or changes to Customers premises, vandalism, corrosion (including but not limited to micro -bacterially induced corrosion ("MIC")), power failure, current fluctuation, failure due to non -Company installation, lightning, electrical storm, or other severe weather, water, accident, fire, acts of God or any other cause external to the Covered Syslem(s). Repair Services provided pursuant to this Agreement do not cover and specifically excludes system upgrades and the replacementofobsolete systems, equipment, components or parts. All such services may be provided by Company at Company's sole discretion at an additional charge. If Emergency Services are expressly included in the scope of Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Date: 05/03/2021 Page 7 of 7 work section, the Agreement price does not include travel expenses. 29. No Option to Solicit. Customer shall not, directly or indirectly, on its own behalf or on behalf of any other person, business, corporation or entity, solicit or employ any Company employee, or induce any Company employee to leave his or her employment, for a period of two years after termination of this Agreement. 30. Force Majeure; Delays. Company shall not be liable, nor in breach or default of its obligations under this Agreement, for delays, interruption. failure to render services, or any other failure by Company to perform an obligation under this Agreement, where such delay, interruption or failure is caused, in whole or in part, directly or indirectly, by a Force Majeure Event. A "Force Majeure Event" is a condition or event that is beyond the reasonable control of Company, whether foreseeable or unforeseeable, including, without limitation, acts of God, severe weather (including but not limited to hurricanes, tornados, severe snowstorms or severe rainstorms), wildfires, floods, earthquakes, seismic disturbances, or other natural disasters, acts or omissions of any governmental authority (including change of any applicable law or regulation), epidemics, pandemics, disease, viruses, quarantines, or other public health risks and/or responses thereto, condemnation, strikes, lock -outs, labor disputes, an increase of 5% or more in tariffs or other excise taxes for materials to be used on the project, fires, explosions or other casualties, thefts, vandalism, civil disturbances, insurrection, mob violence, riots, war orother armed conflict (or the serious threat of same), acts of terrorism, electrical power outages, Interruptions or degradations in telecommunications, computer, network, or electronic communications systems, data breach, cyber-attacks, ransomware, unavailability or shortage of parts, materials, supplies, or transportation, or any other cause or casualty beyond the reasonable control of Company. If Company's performance of the work is delayed, impacted, or prevented by a Force Majeure Event or its continued effects, Company shall be excused from performance under the Agreement. Without limiting the generality of the foregoing, if Company is delayed in achieving one or more of the scheduled milestones set forth in the Agreement due to a Force Majeure Event, Company will be entitled to extend the relevant completion date by the amount of time that Company was delayed as a result of the Force Majeure Event, plus such additional time as may be reasonably necessary to overcome the effect of the delay. To the extent that the Force Majeure Event directly or indirectly increases Company's cost to perform the services, Customer is obligated to reimburse Company for such increased costs, including, without limitation, costs incurred by Company for additional labor, inventory storage, expedited shipping fees, trailer and equipment rental fees, subcontractor fees or other costs and expenses incurred by Company In connection with the Force Majeure Event. 31.One-Year Claims Limitation; Choice of Law. No claim or cause of action, whether known or unknown, shall be brought against Company more than one year after the claim first arose. Except as provided for herein, Company's claims must also be brought within one year. Claims not subject to the one-year limitation include claims for unpaid: (a) contract amounts, (b) change order amounts (approved or requested) and (c) delays and/or work inefficiencies. The laws of Massachusetts shall govern the validity, enforceability, and interpretation of this Agreement. 32. Assignment. Customer may not assign this Agreement without Company's prior written consent. Company may assign this Agreement to an affiliate without obtaining Customers consent. 33. Entire Agreement. The parties intend this Agreement, together with any attachments or Riders (collectively the "Agreement) to be the final, complete and exclusive expression of their Agreement and the terms and conditions thereof. This Agreement supersedes all prior representations, understandings or agreements between the parties, written or oral, and shall constitute the sole terms and conditions of sale for all equipment and services. No waiver, change, or modification of any terms or conditions of this Agreement shall be binding on Company unless made in writing and signed by an Authorized Representative of Company. 34. Severability. If any provision of this Agreement is held by any court or other competent authority to be void or unenforceable in whole or in part, this Agreement will continue to be valid as to the other provisions and the remainder of the affected provision. 35. Legal Fees. Company shall be entitled to recover from the customer all reasonable legal fees incurred in connection with Company enforcing the terms and conditions of this Agreement. 36. Software and Digital Services. Use, implementation, and deployment of the software and hosted software products ("Software") offered under these terms shall be subject to, and governed by, Company's standard terms for such Software and Software related professional services in effect from time to time at https:/twww.johnsoncontrols,com/techterms (collectively, the "Software Terms"). Applicable Software Terms are incorporated herein by this reference. Other than the right to use the Software as set forth in the Software Terms, Company and its licensors reserve all right, title, and interest (including all intellectual property rights) in and to the Software and improvements to the Software. The Software that is licensed hereunder is licensed subject to the Software Terms and not sold. If there is a conflict between the other to rms herein and the Software Terms, the Software Terms shall lake precedence and govern with respect to rights and responsibilities relating to the Software, its implementation and deployment and any improvements thereto. 37. License Information (Security System Customers): AL Alabama Electronic Security Board of Licensure 7956 Vaughn Road, Pmb 392, Montgomery, Alabama 36116 (334) 264-9388: AR Regulated by: Arkansas Board of Private Investigators And Private Security Agencies, #1 State Police Plaza Drive, Little Rock 72209 (501)618-8600: CA Alarm company operators are licensed and regulated by the Bureau of Security and Investigative Services, Department of Consumer Affairs, Sacramento, CA, 95814. Upon completion of the installation of the alarm system, the alarm company shall thoroughly instruct the purchaser in the proper use of the alarm system. Failure by the licensee, without legal excuse, to substantially commence work within 20 days from the approximate date specified in the agreement when the work will begin is a violation of the Alarm Company Act: NY Licensed by N.Y.S. Department of the State: TX Texas Commission an Private Security, 5805 N. Lamar Blvd., Austin, 78752-4422, 512-424-7710.Lioense numbers available at www.johnsonoontrols.com or contact your local Johnson Controls office. IMPORTANT NOTICE TO CUSTOMER In accepting this Proposal, Customer agrees to the terms and conditions contained herein and any attachments or riders attached hereto that contain additional terms and conditions. It is understood that these terms and conditions shall prevail over any variation in terms and conditions on any purchase order or other document that the Customer may issue. Any changes in the system requested by the Customer after the execution of this Agreement shall be paid for by Customer and such changes shall be authorized in writing. ATTENTION IS DIRECTED TO THE LIMITATION OF LIABILITY, WARRANTY, INDEMNITY AND OTHER CONDITIONS ON THE PRECEDING PAGES. This proposal shall be void if not accepted in writing within 30 days from the date of the Proposal. Fire Domain Sale and Installation Agreement Job Design April 10, 2020 Offered By: Johnson Controls Fire Protection LP License#: 800 Railhead Rd Ste 304 FORT WORTH, TX 76106-1981 Telephone: (817) 210 0700 Representative: Accepted By: (Customer) Company: ,Q(,✓A OT 41es f 1414I Address: �Jr fo%nw Sla- 7. S-,k * TZ00 Signature: Aa Title: r611A iv(H(a tt/ P.O.#: Date: _61Z ZO Z Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America 0 2020 Johnson Controls. ALL RIGHTS RESERVED. I7V ohnson .i �1 Controls employees, agents, subcontractors, suppliers, and representatives as additional insureds on Customer's general liability and auto liability policies. 26. Termination. Any termination under the lerns of this Agreement shall be made in writing. In the event Customer terminates this Agreement prior to completion for any reason nor arising solely from Company's performance or failure to perform, Customer understands and agrees that Company will incur costs of administration and preparation that are difficult to estimate or determine, Accordingly, should Customer terminate this Agreement as described above, Customer agrees to pay all charges incurred for products and equipment Installed and services performed, and In addition pay an amount equal to twenty (20%) percent of the price of products and equipment not yet delivered and Services not yet performed, return all products and equipment delivered and pay a restocking fee of twenty (20%) percent the price of products or equipment returned. Company may terminate this Agreement immediately at its sole discretion upon the occurrence of any Event of Default as hereinafter defined. Company may also terminate this Agreement at its sole discretion upon notice to Customer if Company's performance of Its obligations under this Agreement becomes impracticable due to obsolescence of equipment at Customer's premises or unavailability of parts. 27. Default. An Event of Default shall be (a) failure of Customer to pay any amount when due and payable, (b) abuse of the System or the Equipment, (c) dissolution, termination, discontinuance, insolvency or business failure of Customer. Upon the occurrence of an Event of Default, Company may pursue one or more of the following remedies: (1) discontinue furnishing Services and'delivering Equipment, (ii)) by written notice to Customerdeclare the balance of unpaid amounts due and to become due under this Agreement to be immediately due and payable; (ill) receive Immediate possession of any Equipment forwhich Customerhas not paid; (iv) proceed at law or equity to enforce performance by Customer or recover damages for breach of this Agreement, and (v) recover all costs and expenses, including without limitation reasonable attorneys' fees, in connection with enforcing or attempting to enforce this Agreement. 28. Exclusions. Unless expressly Included in the Scope of Work, this Agreement expressly excludes, without limitation, testing inspection and repair of duct detectors, beam detectors, and UV/IR equipment; provision of fire watches; clearing of ice blockage; draining of improperly pitched piping; replacement of batteries; recharging of chemical suppression systems; reloading of, upgrading, and maintaining computer software;. system upgrades and the replacement of obsolete systems, equipment, components or parts; making repairs or replacements necessitated by reason of negligence or misuse of components or equipment or changes to Customer's premises, vandalism, corrosion (including but not limited to micro-baclorialty Induced corrosion ('MIC')), power failure, current fluctuation, failure due to non -Company installation, lightning, electrical storm, or other severe weather, water, accident, fire, acts of God or any other cause external to the Covered System(s). Repair Services provided pursuant to this Agreement do not cover and specifically excludes system upgrades and the replacement of obsolete systems, equipment, components or parts. All such services may be provided by Company at Company's sole discretion at an additional charge. If Emergency Services are expressly included In the scope of Project: Westlake Academy Customer Reference: Johnson Controls Reference: 405413480 Date: 05/03/2021 Page 7 of 7 work section, the Agreement price does not include travel expenses. 29, No Option to Solicit. Customer shall not, directly or Indirectly, on its own behalf or on behalf of any other person, business, corporation or entity, solicit or employ any Company employee, orinduce any Company employee to leave his or her employment, for a period of two years after termination of this Agreement. 30. Force Majeure; Delays. Company shall not be liable, nor in breach or default of Its obligations under this Agreement, for delays, interruption. failure to render services, or any other failure by Company to perform an obligation under this Agreement, where such delay, interruption or failure is caused. In whole or in part, directly or indirectly, by a Force Majeure Event. A'Force Majeure Event' is a condition or event that is beyond the reasonable control of Company, whether foreseeable or unforeseeable, including, without limitation, acts of God, severe weather (Including but not limited to hurricanes, tornados. severe snowstorms or severe rainstorms), wildfires, floods, earthquakes, seismic disturbances, or other natural disasters, acts or omissions of any governmental authority (including change of any applicable law or regulallon), epidemics, pandemics, disease, viruses, quarantines, or other public health risks and/or responses thereto, condemnation, strikes, lock -outs, labor disputes. an Increase of 5% or more In tariffs or other excise taxes for materials to be used on the project, fires, explosions or other casualties, thefts, vandalism, civil disturbances. Insurrection, mob violence, riots, war oroiher armed conflict (or the serious threat of same), ads of terrorism, electrical power outages, interruptions or degradations in telecommunications, computer, network, or electronic communications systems, data breach, cyber-attacks, ransomware, unavailability or shortage of parts, materials, supplies, or transportation, or any other cause or casually beyond the reasonable control of Company, If Company's performance of the work is delayed, impacted, or prevented by a Force Majeure Event or Its continued effects, Company shall be excused from performance under the Agreement. Without limiting the generalityof the foregoing, if Company Is delayed in achieving one or more of the scheduled milestones set forth in the Agreement due to a Force Majeure Event, Company will be entitled to extend the relevant completion dale by the amount of time [hat Company was delayed as a result of the Force Majeure Event, plus such additional time as may be reasonably necessary to overcome the effect of the delay. To the extent that the Force Majeure Event directly or indirectly increases Company's cost to perform the services, Customer Is obligated to reimburse Company for such Increased costs, including, without limitation, costs incurred by Company for additional labor, inventory storage, expedited shipping fees, trailer and equipment rental fees, subcontractor fees or other costs and expenses incurred by Company In connection with the Force Majeure Event. 31, One -Year Claims Limitation; Choice of Law. No claim or cause of action, whether known or unknown, shall be brought against Company more than one yearafter the claim first arose. Except as provided for herein, Company's claims must also be brought within one year. Claims not subject to the one-year limitation include claims for unpaid: (a) contract amounts, (b) change order amounts (approved or requested) and (c) delays and/or work inefficiencies. The laws of Massachusetts shall govern the validity, enforceability, and interpretation of this Agreement. 32. Assignment. Customer may not assign this Agreement without Company's priorwritten consent. Company may assign this Agreement to an affiliate without obtaining Customer's consent. 33. Enure Agreement. The parties intend this Agreement, together with any attachments or Riders (collectively the 'Agreement) to be the final, complete and exclusive expression of their Agreement and the terms and conditions thereof, This Agreement supersedes all prior representations, understandings or agreements between the parties, written or oral, and shall constitute the sole terms and conditions of sale for all equipment and services. No waiver, change, or modification of any terms or conditions of this Agreement shall be binding on Company unless made in writing and signed by an Authorized Representative of Company. 34. Severabillty, If any provision of this Agreement is held by any court or other competent authority to be void or unenforceable in whole or in part, this Agreement will continue to be valid as to the other provisions and the remainder of the affected provision. 35. Legal Fees. Company shall be entitled to recover from the customer all reasonable legal fees Incurred in connection with Company enforcing the terms and conditions of this Agreement. 36, Software and Digital Services. Use, implementation, and deployment of the software and hosted software products ('Software-) offered under these terms shall be subject to, and governed by, Company's standard terms for such Software and Software related professional services in effect from time to time at hilps:/MAvw,johnsoncontrols.comltechtorms (collectively, the 'Software TermsJ. Applicable Software Terms are incorporated herein by this reference. Other than the light to use the Software as set forth In the Software Terms, Company and its licensors reserve all right, title, and interest (including all intellectual property rights) in and to the Software and improvements to the Software. The Software that is licensed hereunder is licensed subject to the Software Terms and not sold. If (here is a conflict between the otherterns herein and the Software Terms, the Software Terms shall lake precedence and govern with respect to rights and responsibilities relating to the Software, its implementation and deployment and any Improvements thereto. 37. License Information (Security System Customers): AL Alabama Electronic Security Board of Licensure 7956 Vaughn Road, Pmb 392, Montgomery, Alabama 36116 (334) 264.9388: AR Regulated by: Arkansas Board of Private Investigators And Private Security Agencies, #1 State Police Plaza Drive, Little Rock 72209 (501)618.8600: CA Alarm company operators are licensed and regulated by the Bureau of Security and Investigative Services, Department of Consumer Affairs, Sacramento, CA, 95814, Upon completion of the Installation of the alarm system, the alarm company shall thoroughly instruct the purchaser In the proper use of the alarm system. Failure by the licensee, without legal excuse, to substantially commends work within 20 days from the approximate date specified in the agreement when the work will begin is a violation of the Alarm Company Act: NY Licensed by N.Y.S. Department of the Slate: TX Texas Commission on Private Security, 5805 N. Lainar Blvd., Austin, 78752-4422, 512424-7710.Lioense numbers available at www.johnsoncontrals.com or contact your local Johnson Controls office. IMPORTANT NOTICE TO CUSTOMER In accepting this Proposal, Customer agrees to the terms and conditions contained herein and any attachments or riders attached hereto that contain additional terms and conditions. It is understood that these terms and conditions shall prevail over any variation in terms and conditions on any purchase order oroiher document that the Customer may Issue. Any changes in the system requested by the Customer after the execution of this Agreement shall be paid for by Customer and such changes shall be authorized In writing. ATTENTION IS DIRECTED TO THE LIMITATION OF LIABILITY, WARRANTY, INDEMNITY AND OTHER CONDITIONS ON THE PRECEDING PAGES. This proposal shall be void if not accepted In writing within 30 days from the date of the Proposal, Fire Domain Sala and Insiallallon Agreement Job Design April 10. 2020 Offered By: Accepted By: (Customer) Johnson Controls Fire Protection LP License#: 800 Railhead Rd Ste 304 FORT WORTH, TX 76106.1981 Telephone: (817) 210 0700 Representative: Kristopher Womack Service Supervisor Company: _70i' °l 6-F �✓CSf la�� __ __ Address: /i U $014ng Qlvd,—Cold Sw 20c, Signature: la Title JtJOA OM4 IC/ P.O.#: Dale: Fire, Security, Communications, Sales & Service Offices & Representatives in Principal Cities throughout North America 0 2020 Johnson Controls. ALL RIGHTS RESERVED. r7'�